June 14, 2026

South St. Paul, MN Water Quality Report 2026

By PureWaterGuys

EPA compliance testing (2012–2019) detected 8 regulated contaminants in this water system: Gross alpha radioactivity, Fluoride, Nitrate + nitrite + 5 more.

Unlock the full breakdown — detected levels vs. legal limits, plus what removes each one.

Full contaminant breakdown

EPA Six-Year Review compliance monitoring, 2012–2019 — the most recent national compliance dataset EPA has published. See the sections above for more recent violation and PFAS records.

ContaminantAvg. detectedHighest sampleFederal limitAvg. vs. limit
Gross alpha radioactivityEPA health goal: zero 11.3 pCi/L 25 pCi/L 15 pCi/L 75%
Fluoride 945 ppb 1400 ppb 4000 ppb 24%
Nitrate + nitrite 2250 ppb 3300 ppb 10000 ppb 22%
LeadEPA health goal: zero 1.75 ppb 11 ppb 15 ppb (action level) 12%
Copper 92.1 ppb 296 ppb 1300 ppb (action level) 7%
Barium 98.7 ppb 129 ppb 2000 ppb 5%
UraniumEPA health goal: zero 1.36 ppb 1.36 ppb 30 ppb 5%
Chromium (total) 0.767 ppb 1.1 ppb 100 ppb 1%

Also tested, no detections: 1,1,1-Trichloroethane, 1,1,2-Trichloroethane, 1,1-Dichloroethylene, 1,2,4-Trichlorobenzene, 1,2-Dichloroethane, 1,2-Dichloropropane, 2,4,5-TP (Silvex), 2,4-D, Alachlor, Antimony, Arsenic, Atrazine, Benzene, Benzo(a)pyrene, Beryllium, Cadmium, Carbofuran, Carbon tetrachloride, Chlordane, Chlorobenzene, Cyanide, DBCP, DEHA (adipate), DEHP (phthalate), Dalapon, Dichloromethane, Dinoseb, Endrin, Ethylbenzene, Ethylene dibromide (EDB), Glyphosate, Heptachlor, Heptachlor epoxide, Hexachlorobenzene, Hexachlorocyclopentadiene, Lindane, Mercury (inorganic), Methoxychlor, Nitrite, Oxamyl, Pentachlorophenol, Picloram, Selenium, Simazine, Styrene, Tetrachloroethylene (PCE), Thallium, Toluene, Toxaphene, Trichloroethylene (TCE), Vinyl chloride, cis-1,2-Dichloroethylene, o-Dichlorobenzene, p-Dichlorobenzene, trans-1,2-Dichloroethylene.

Reverse osmosis (drinking water)

The treatment category most often matched to dissolved contaminants like lead, arsenic, nitrate, fluoride, and radiological contaminants detected in this system.

Shop reverse osmosis →

Source: U.S. EPA Six-Year Review 4 compliance monitoring data (2012–2019), the most recent nationwide compliance dataset EPA has released, reported at the water-system level. A detection is not a violation. “Avg. vs. limit” compares the average of laboratory detections to the federal MCL or action level; individual faucets can differ — household plumbing affects lead and copper, and a state-certified laboratory test of your own tap is the only way to confirm levels in your home. Treatment categories are general matches, not a certification claim for a specific product and contaminant.

Water Utility: South Saint Paul
Population Served: 20,664 residents
Data Sources: EPA SDWIS + EPA UCMR5
Report Year: 2026

South St. Paul, Minnesota drinking water is supplied by South Saint Paul. All US public water systems must test drinking water and report results to the EPA under the Safe Drinking Water Act. This report summarizes health-based violations and PFAS detections recorded in federal databases to help you make informed decisions about home water filtration.

EPA Health-Based Violation History

The following contaminants exceeded EPA maximum contaminant levels (MCLs) at this utility since 2010:

Contaminant Violation Years Filter Solution
Combined Radium (-226 And -228) 2018-2020 Whole House Filters
Gross Alpha, Excl. Radon And U 2018-2020 Water Filters
Revised Total Coliform Rule 2018 Whole House Filters

Source: EPA Safe Drinking Water Information System (SDWIS), updated quarterly. Health-based violations only.

PFAS "Forever Chemical" Detections

PFAS compounds were detected in this water system during EPA's Fifth Unregulated Contaminant Monitoring Rule (UCMR5) testing program (2023-2025). EPA has set maximum contaminant levels of 4 parts per trillion (ppt) for PFOA and PFOS individually.

PFAS Compound Level Detected Solution
PFBA 0.0057 ug/L PFAS Filters
PFPeA 0.0110 ug/L PFAS Filters
PFOA 0.0076 ug/L PFAS Filters
PFHxS 0.0056 ug/L PFAS Filters
PFHxA 0.0047 ug/L PFAS Filters
PFBS 0.0047 ug/L PFAS Filters

Source: EPA UCMR5 occurrence data. Levels in micrograms per liter (ug/L = parts per billion). 1 ug/L = 1,000 ppt.

Should You Filter Your South St. Paul Water?

Even utilities with no EPA violations may have contaminants present below legal limits but above health guidelines. The EPA sets maximum contaminant levels based on what is feasible and affordable to treat at scale -- not necessarily what carries zero health risk. Many independent health organizations recommend filtration for households with children, pregnant women, or immunocompromised individuals regardless of utility compliance status.

Protect Your South St. Paul Home Water

PureWaterGuys.com carries filtration systems certified to reduce PFAS compounds like PFOA and PFOS. We ship to all Minnesota addresses with free expert guidance on the right system.

Shop PFAS Water Filters →Take the Water Quiz

Filters for South St Paul, MN Water Issues

Based on contaminants detected in this report, these systems are worth considering:

⚠️
PFAS / Forever Chemicals
NSF-certified filters proven to remove PFAS, PFOA, PFOS, and 200+ contaminants.
Shop PFAS / Forever Chemicals Filters →
🔬
Arsenic
Whole-house systems with certified arsenic-reduction media.
Shop Arsenic Filters →
💧
Nitrates / Nitrites
Reverse osmosis systems that reduce nitrates to safe levels.
Shop Nitrates / Nitrites Filters →
🏠
Chlorine / Disinfection Byproducts
Whole-house carbon filters that eliminate chlorine taste, odor, and DBPs.
Shop Chlorine / Disinfection Byproducts Filters →
🦠
Bacteria / Pathogens
UV sterilizers and certified filtration to eliminate harmful bacteria and pathogens.
Shop Bacteria / Pathogens Filters →
☢️
Radiological Contaminants
RO systems certified to reduce radium, radon, and uranium.
Shop Radiological Contaminants Filters →

Frequently Asked Questions

Is South St. Paul tap water safe to drink?

South Saint Paul is required to meet EPA federal drinking water standards. However, meeting legal standards is not the same as being contaminant-free. Trace levels of disinfection byproducts, PFAS compounds, and other regulated contaminants are common in US municipal water systems.

Does South St. Paul water have PFAS?

PFAS compounds were detected in this utility's water during EPA UCMR5 monitoring. A certified PFAS filter -- such as reverse osmosis or activated carbon block -- can significantly reduce these compounds at your tap.

What water filter works best for South St. Paul?

A whole-house carbon block filter removes chlorine, chloramines, and many VOCs. For PFAS, arsenic, and nitrates, a reverse osmosis under-sink system provides the highest reduction rates. Take our free 2-minute quiz to find the right system for your home and budget.

Data sourced from EPA SDWIS and UCMR5 federal databases. PureWaterGuys.com is not affiliated with any municipal water utility. Contact your utility's annual Consumer Confidence Report (CCR) for complete local data.

← Back to Water Quality Reports