June 14, 2026

Tyler, TX Water Quality Report 2026

By PureWaterGuys

EPA compliance testing (2012–2019) detected 19 regulated contaminants in this water system: Total trihalomethanes (TTHMs), Haloacetic acids (HAA5), Radium (combined) + 16 more.

Unlock the full breakdown — detected levels vs. legal limits, plus what removes each one.

Full contaminant breakdown

EPA Six-Year Review compliance monitoring, 2012–2019 — the most recent national compliance dataset EPA has published. See the sections above for more recent violation and PFAS records.

ContaminantAvg. detectedHighest sampleFederal limitAvg. vs. limit
Total trihalomethanes (TTHMs) 52 ppb 128 ppb 80 ppb 65%
Haloacetic acids (HAA5) 32.9 ppb 127 ppb 60 ppb 55%
Radium (combined)EPA health goal: zero 1.5 pCi/L 1.5 pCi/L 5 pCi/L 30%
Cyanide 54.8 ppb 152 ppb 200 ppb 27%
Gross alpha radioactivityEPA health goal: zero 3.3 pCi/L 3.3 pCi/L 15 pCi/L 22%
LeadEPA health goal: zero 3.26 ppb 62.1 ppb 15 ppb (action level) 22%
Benzo(a)pyreneEPA health goal: zero 0.03 ppb 0.03 ppb 0.2 ppb 15%
DEHP (phthalate)EPA health goal: zero 0.921 ppb 1.7 ppb 6 ppb 15%
ArsenicEPA health goal: zero 1.14 ppb 1.61 ppb 10 ppb 11%
Copper 132 ppb 3200 ppb 1300 ppb (action level) 10%
Fluoride 305 ppb 760 ppb 4000 ppb 8%
Antimony 0.265 ppb 0.27 ppb 6 ppb 4%
Atrazine 0.105 ppb 0.11 ppb 3 ppb 3%
Barium 60 ppb 170 ppb 2000 ppb 3%
Selenium 1.43 ppb 1.5 ppb 50 ppb 3%
Nitrate 156 ppb 378 ppb 10000 ppb 2%
Nitrate + nitrite 178 ppb 282 ppb 10000 ppb 2%
Chromium (total) 0.693 ppb 1.1 ppb 100 ppb 1%
Thallium 0.007 ppb 0.007 ppb 2 ppb <1%

Also tested, no detections: 1,1,1-Trichloroethane, 1,1,2-Trichloroethane, 1,1-Dichloroethylene, 1,2,4-Trichlorobenzene, 1,2-Dichloroethane, 1,2-Dichloropropane, 2,4,5-TP (Silvex), 2,4-D, Alachlor, Asbestos, Benzene, Beryllium, Bromate, Cadmium, Carbofuran, Carbon tetrachloride, Chlordane, Chlorobenzene, DBCP, DEHA (adipate), Dalapon, Dichloromethane, Dinoseb, Endrin, Ethylbenzene, Ethylene dibromide (EDB), Heptachlor, Heptachlor epoxide, Hexachlorobenzene, Hexachlorocyclopentadiene, Lindane, Mercury (inorganic), Methoxychlor, Nitrite, Oxamyl, Pentachlorophenol, Picloram, Simazine, Styrene, Tetrachloroethylene (PCE), Toluene, Toxaphene, Trichloroethylene (TCE), Uranium, Vinyl chloride, Xylenes (total), cis-1,2-Dichloroethylene, o-Dichlorobenzene, p-Dichlorobenzene, trans-1,2-Dichloroethylene.

Reverse osmosis (drinking water)

The treatment category most often matched to dissolved contaminants like lead, arsenic, nitrate, fluoride, and radiological contaminants detected in this system.

Shop reverse osmosis →

Whole-house carbon filtration

The treatment category most often matched to disinfection byproducts (TTHMs, haloacetic acids), chlorine taste and odor, and organic compounds detected in this system.

Shop whole-house systems →

Source: U.S. EPA Six-Year Review 4 compliance monitoring data (2012–2019), the most recent nationwide compliance dataset EPA has released, reported at the water-system level. A detection is not a violation. “Avg. vs. limit” compares the average of laboratory detections to the federal MCL or action level; individual faucets can differ — household plumbing affects lead and copper, and a state-certified laboratory test of your own tap is the only way to confirm levels in your home. Treatment categories are general matches, not a certification claim for a specific product and contaminant.

Water Utility: City Of Tyler
Population Served: 107,000 residents
Data Sources: EPA SDWIS + EPA UCMR5
Report Year: 2026

Tyler, Texas drinking water is supplied by City Of Tyler. All US public water systems must test drinking water and report results to the EPA under the Safe Drinking Water Act. This report summarizes health-based violations and PFAS detections recorded in federal databases to help you make informed decisions about home water filtration.

EPA Health-Based Violation History

The following contaminants exceeded EPA maximum contaminant levels (MCLs) at this utility since 2010:

Contaminant Violation Years Filter Solution
Revised Total Coliform Rule 2023 Whole House Filters
Total Haloacetic Acids (Haa5) 2015-2016 Whole House Filters
Tthm 2016 Water Filters

Source: EPA Safe Drinking Water Information System (SDWIS), updated quarterly. Health-based violations only.

PFAS "Forever Chemical" Detections

PFAS compounds were detected in this water system during EPA's Fifth Unregulated Contaminant Monitoring Rule (UCMR5) testing program (2023-2025). EPA has set maximum contaminant levels of 4 parts per trillion (ppt) for PFOA and PFOS individually.

PFAS Compound Level Detected Solution
PFHxA 0.0032 ug/L PFAS Filters
PFPeA 0.0046 ug/L PFAS Filters

Source: EPA UCMR5 occurrence data. Levels in micrograms per liter (ug/L = parts per billion). 1 ug/L = 1,000 ppt.

Should You Filter Your Tyler Water?

Even utilities with no EPA violations may have contaminants present below legal limits but above health guidelines. The EPA sets maximum contaminant levels based on what is feasible and affordable to treat at scale -- not necessarily what carries zero health risk. Many independent health organizations recommend filtration for households with children, pregnant women, or immunocompromised individuals regardless of utility compliance status.

Protect Your Tyler Home Water

PureWaterGuys.com carries filtration systems engineered to address the most common contaminants in US tap water. We ship to all Texas addresses with free expert guidance on the right system.

Shop Water Filtration Systems →Take the Water Quiz

Filters for Tyler, TX Water Issues

Based on contaminants detected in this report, these systems are worth considering:

⚠️
PFAS / Forever Chemicals
NSF-certified filters proven to remove PFAS, PFOA, PFOS, and 200+ contaminants.
Shop PFAS / Forever Chemicals Filters →
🔬
Arsenic
Whole-house systems with certified arsenic-reduction media.
Shop Arsenic Filters →
💧
Nitrates / Nitrites
Reverse osmosis systems that reduce nitrates to safe levels.
Shop Nitrates / Nitrites Filters →
🏠
Chlorine / Disinfection Byproducts
Whole-house carbon filters that eliminate chlorine taste, odor, and DBPs.
Shop Chlorine / Disinfection Byproducts Filters →
🦠
Bacteria / Pathogens
UV sterilizers and certified filtration to eliminate harmful bacteria and pathogens.
Shop Bacteria / Pathogens Filters →

Frequently Asked Questions

Is Tyler tap water safe to drink?

City Of Tyler is required to meet EPA federal drinking water standards. However, meeting legal standards is not the same as being contaminant-free. Trace levels of disinfection byproducts, PFAS compounds, and other regulated contaminants are common in US municipal water systems.

Does Tyler water have PFAS?

PFAS compounds were detected in this utility's water during EPA UCMR5 monitoring. A certified PFAS filter -- such as reverse osmosis or activated carbon block -- can significantly reduce these compounds at your tap.

What water filter works best for Tyler?

A whole-house carbon block filter removes chlorine, chloramines, and many VOCs. For PFAS, arsenic, and nitrates, a reverse osmosis under-sink system provides the highest reduction rates. Take our free 2-minute quiz to find the right system for your home and budget.

Data sourced from EPA SDWIS and UCMR5 federal databases. PureWaterGuys.com is not affiliated with any municipal water utility. Contact your utility's annual Consumer Confidence Report (CCR) for complete local data.

← Back to Water Quality Reports